You have the choice to provide measurements from your body, measurements from a well fitting shirt, or you can select from standard sizes.
Submit two selfies to Pic Tailor to get automatically measured up.
Use our simple step-by-step guide to measure your body.
Use our simple step-by-step guide to measure an existing shirt you own.
No measurements required. Select from our standard sizes.
PicTailor lets you submit two photos from which your measurements are calculated
Create PicTailor Profile >
The Slim fit shirt is more tapered to the body, accentuating the body’s shape and is generally suited to men with a lean or athletic build.
The Regular fit is less tapered than the Slim Fit providing a little more room and is generally suited to men with an average build.
The Loose Fit provides a lot more room to move. It is suited to bulkier men, or those who like their shirts to have a baggier fit.
Measure around your neck just below your Adams apple. Place one finder between your neck and the tape to represent the space you require for your collar. We will construc your collar to this exact measurement.
Measure around the chest at its widest point. The tape should be tucked high under your armpits and sit approximately at nipple level.
Measure around your stomach with the tape sitting just above your hip bones. If you have a belly, measure it at the widest point, and do not suck it in.
Measure around the hip and buttocks at the widest point.
The length measurement should be taken from the top of the shoulder at the point near the neck, along the front of your body, to a point where you want the shirt to end. Stand up in a relax posture.
The arm measurement is taken from the corner point, where the arm meets the shoulder, down to where you want the cuff to finish. It is very important that you use this same corner point for both your Arm and Shoulders measurement as the two are closely related. It is better to make this measurement a bit longer rather than a bit too short.
The shoulders measurement is taken across the shoulders from one tip of one shoulder to the other. Be sure to measure right on the corner point, where the arm meets the shoulder. It is very important that you use this same corner point for both our Arm and Shoulders measurements as the two are closely related.
Measure from the top of the shoulder, down the front of the shoulder, under the armpit and back up around to the top of the shoulder.
The biceps measurement should be taken around your upper arm at the widest point. Do not tighten the tape measure.
Place the tape measure around your wrist it the narrowest point.
The collar measurement should be taken from the outer edge of the buttonhole to the center of the collar button when the collar is spread flat.
Measure straight across the chest from one armpit to the other. Do not stretch apart the shirt when taking the measurement.
The waist measurement should be taken across the width of the shirt at the narrowest point.
The hips measurement should be taken accross the bottom of the shirt at the end of side seams. Do not stretch the shirt apart too much when taking this measurement.
Measure from the seam at the top of the shirt down the edge at the bottom of the shirt.
The sleeve length measurement should be taken from the shoulder/sleeve seam along the upper edge of the sleeve to the edge of the cuff.
The shoulder width measurement should be taken between the shoulders at the sleeve seam.
The arm hole measurement should be taken as a straight line from the shoulder/sleeve seem to the lower corner where the sleeve meets the body.
The cuff measurement should be taken when the cuff is spread flat. Button Cuffs: Measure from the outer edge of the cuff button hole to the centre of the button French Cuffs: Measure from the outer edge of the cuff link holes.
The Slim fit shirt is more tapered to the body, accentuating the body's shape and is generally suited to men with a lean or athletic build.
CONTRASTING COLLAR & CUFF LINING